How to Change iPhone Screen

Alicia Santos

iPhone, Tutorials

Changing the screen of an iPhone can be a daunting task, but with the right tools and a little bit of patience, you can do it yourself. In this tutorial, we will guide you through the process step by step.

So, let’s get started!

Gather the Necessary Tools

Before you begin, make sure you have all the required tools:

  • Replacement screen: You will need to purchase a new screen that is compatible with your iPhone model.
  • Screwdriver set: Get a small screwdriver set that includes a pentalobe screwdriver for removing the screws.
  • Suction cup: This will be used to lift the old screen off the iPhone.
  • Plastic pry tool: It helps in prying open the iPhone without causing any damage.
  • Tweezers: You may need tweezers to handle small screws or connectors.

Step-by-Step Guide

Step 1: Power Off and Remove SIM Card

Before you begin, turn off your iPhone and remove the SIM card tray using a paperclip or SIM card eject tool.

Step 2: Remove Pentalobe Screws

Use the pentalobe screwdriver to remove the two screws located at the bottom of your iPhone.

Step 3: Lift Screen with Suction Cup

Place the suction cup just above the home button and gently pull up to create a small gap between the screen and frame. Insert a plastic pry tool into this gap and slide it around the edges to loosen the adhesive.

Step 4: Disconnect Cables

Once the screen is loose, carefully lift it up and support it with something. Now, disconnect the display cables by using a pry tool or tweezers.

Be gentle to avoid damaging the cables or connectors.

Step 5: Remove the Old Screen

With all the cables disconnected, you can now remove the old screen assembly completely and set it aside.

Step 6: Install the New Screen

Take your new replacement screen and carefully align it with the frame. Gently press down to secure it in place.

Make sure all the connectors are properly seated.

Step 7: Reconnect Cables

Next, reconnect all the display cables that were previously disconnected. Use gentle pressure to ensure they are securely attached.

Step 8: Secure with Screws

Put back the two pentalobe screws you removed earlier to secure the new screen in place.

Final Thoughts

Changing an iPhone screen may seem overwhelming at first, but by following these steps and taking your time, you can successfully replace your damaged screen. Remember to be patient and cautious throughout the process.

If you encounter any difficulties or are unsure about any step, it’s always wise to seek professional help.

Now that you have learned how to change an iPhone screen, you can save money by doing it yourself instead of taking it to a repair shop. Good luck with your repair!

Android - iPhone - Mac

 © 2023 UI-Transitions

Privacy Policy